Відео

I don’t think this is the latest version as the newer version ships the tyres uninstalled and comes with belted tyres.

I had all my O2 sensors replaced at a shop in January 2023. In August I got a P1093 code that nobody seems to know anything about. I smoked the car and changed a bunch of expensive parts, cleaned and swapped the injectors and it got better. All my monitors are ready but the code and the light stays on. Can I swap the 2 precats to see if it changes from P1092 to P1093?

Its been years since I've messed with the T-maxx 2.5 my dad bought for me, and i remember it doing this to me a couple of times. One of those times that my tmaxx idled high i placed it one the ground and it took off immediately and smashed right into a curb. Had to replace the cracked bulkhead smh. I miss it a lot these days especially watching old videos I used to enjoy it brings back great memories with my dad.❤

I bought a DB Pro, about a year ago. Just recently starting money on her, so far, have TONS of extra parts (JennysRc). Upgraded the servo 1st thing, went with Savox 1210E, changed the Diff Fluids, and went with 4S Electronics (Mojave 4S (JennysRC). Added a Fan & Heat Sink. Im debating going 17mm hex upgrade, so can use my Badlands Tires off my Typhon, but not sure ( Extenders or not), also worries would the Savox 1210E support the added wheel / tire weight. Me and my sons dont do the Hard Core Bashing, jumps, we race at a local baseball field (Sand), and have the time of our life. Cant do the 3 hour trip 1 way to a track, just not possible with my work schedule.

First thing always. Before running Take air filter off. Check idle gap. Check throttle linkage for fluid movement and proper movement. This is why you’re having problems. First you need the mechanical aspect working properly. Then you can start to run it.

Thanks!

I love watching your videos. Keep up the good work since I got it Rc world I’ve been looking for some areas to to fire off my my cars to small ramps big ramps, big hills anywhere where I can find a jump. I’ve been inspired watching your videos. Keep us the good work.

Thank you for the gas information. About to get one but I want to do it right since they are high in price. I want to make sure I make it last. Thank you

Can’t believe this vid is two years old already. Crazy.. So do u think the wide kit is really worth it cause I two as well and I’m building a third one and I’m so on the fence , wide kit or rpm arms and I have both sets ready to go in I just don’t know what one I’m gonna put in this one ?? What would you suggest in ur honest opinion??? 16:23

What punch do run it on😅

It’s not out of the box if u bashed it and something broke..BASH IT BREAK IT FIX IT

Traxxas 3.3 and 2.5 motors are known for not needing to be tuned frequently. If I ever own a nitro, it'll be a T-Maxx classic or a Revo 3.3 because I'm a sucker for cantilever suspension.

Glad to hear your just busy at work. was wounding didn’t see a video for a while

🤩🤩👍👍🥳🥳🏆🇹🇭

I’m in the fence xmaxx or xrt?

hey Earl you make some of the best videos on UA-cam and they dont tell you that enough your video helped me big time get my new Losi working came unbound n the DX three was freaking out, thought it was a HH dud but your calm talking about it showed me the things I needed to see that weren't even in the video by intention I have a question tho I've been riding dirt bikes for like 30 or 40 years why in the world is the steering reversed it feels all wrong like that feels totally normal the right way so why they done that just wondering I'm impressed by their build quality size and weight in the whole thing can't wait to go run it tomorrow on the same trails I run on lol

Yeah regular check bearing of the diffs before they melt the bulkheads which then causes play in the gears. One problem goes on to the other

Nice video. Order one today:)

What if you powered the receiver with a nitro battery pack before powering up esc, after rx connects them pull full trigger and plug esc in

What kind of tires and wheels are you using? They look awesome

I put a Savox servo 8.4V with BEC in my rustler for 100 mph runs . Works great . 👍

How is the outcast 4s i wont. One i seen the big rock video n got one . So i waz looking at the outcast

Why the XMaxx over the XRT? I have the Maxx and looking to add one of them (XMaxx or XRT) to my fleet. Trying to make a determination on which one to go with. Please share if you don’t mind. Thank you. 😎👍🏼

I just replace the bearings ..theyre cheap.

Why do you ask a question in the title of all your videos? Thatd something my grandpa would do

Thanks!

I hate when guys think it’s cool showing off how easy it is to buy cars and throw money around hahaha when most people watching your videos have to save up for 6months to buy a $400 car,don’t get me wrong I’m sure you worked hard for what you got but throwing the hundreds around was a little much but I do love it bidd

Hittin' the crack... The good way.! 😉

Hi there earl I love watching ur content very interesting and you help thousands of peaple know how to fix or up grade there rigs nice job shaun from England uk place called plymouth 🎉🎉😮 👍👌👌🎉🎉

What tires are those

Happy Father’s Day Earl. Great work on that steering buddy 💪🏼🫡🤙

Thanks! Great video I was going through Earl withdrawal😂😂

I think you will like that servo, ive had one in a Xmaxx now for 4 months and bashing it hard ive had no issues with it...I got it right when they hit the shelfs, thought i would try it and so far so good!!!! 👍👍 on your servo saver fix 💯

Happy father's day Earl

😎💯💯💯

Great to see you… I guess we’ll catch up next month👍🏻

Earl good to see ya. I was worried about you. Hope your ok

Earl good to see a video it's good to see the Traxxas Slash speed run project 💯👍🍔🍺

I'm still wondering about the Mojave 100mph quest Earl!! upvoted!!!

Great video. Im out in Texas from OKC visiting family that i have not seen in about 6 months, and here im in the corner watching your video, lol thank u. I can't wait for the next one. Have a blessed Father's Day.

Nylon washers work great to shorten your shocks

Clean engine compartment. Nice to work on that without gloves. Your cars look like mine. Im getting rid of parts attacking all the projects now. I got tired of storing parts in all my cars. Awesome job. Doing that job is my worst fear. Are you in California, just in case? lol. Daaaaang! And youre working in public, I would be stressed as hell and you're so calm. Awesome job Earl man!

What are those wheels and tires? They look great

Brother, please give me the dimensions of the sleeve plate, the spacing of the holes, anyone who has a little talent can measure it and make it themselves

I’m playing around with my drag cars… went back and watched your drag videos 🤙🏻

Hey brother, is everything ok over your way? Hope so🤙🏻

I went back to check out your drag videos… this road is perfect bro… wow! Sticky! I got the Losi Ford truck dragster and the Traxxas Chevy dragster about two years ago and have never ran either one of them. I did upgrade them and now I’m going to have the boys (my buddy’s) drag racing, Ford vs. Chevy $5 a race (just to keep everyone serious) or a drinking game… you lose you chug… you can have fun with these, big time. Doing all that racing with “rules” and all that, isn’t fun to me… in my opinion

This job is a headache your first time I revived my 323i after those 2 pipes got changed out🫡

I love watching your videos. I have a question. What are you doing with the batteries to not slip out out of your truck I seen you have like a blue cover what is that cause? I’m trying to put something in my batteries slip out again again.

Haven't seen any uploads in a minute. Hope all is well 🚀 🌙